PXE Boot is giving PXE-E23″ Client received TFTP error from server
Question
Dear All,
While doing PXE boot my client is getting the error and this is the initial boot only and first time the OSD is configured on the server, and we have only a single server with all the roles and pxe DP configured.
All the ports are enabled, and TFTP post is also listening on the primary site server.
I am sharing the error as well as the DHCP scope settings.
Thanks,
Answers ( 4 )
Dear Debabrata,
Thanks for the reply, so as per your recommendation to get the issue fixed we need to configure ip helper from the network end, do you have any reference document which I will share with the team?
Thanks
Hi Rajneesh,
First of all screenshots are not clear for us.
I would suggest you can use IP helper instead of using DHCP scope. Please follow below link.
https://www.anoopcnair.com/microsoft-rpc-remote-procedure-call-sccm-config/
Dear Debabrata,
Thanks for your reply I am a bit confused about what you have mentioned that using IP helper and the link you have shared to take ref is the RPC configure link.
Using the scope option not correct to configure the PXE boot IP ?
And also, do I need to configure IP helper from the server end or a switch or router end?
Thanks,
IP helper you need to configure on the network end. Check with your network team and ask them to configure IP helper. Basically, you need to provide your PXE server IP address in the IP helper.